Grandstream Networks UCM6206 User Manual

P a g e | 128
UCM6200 Series User Manual
period.
• Specific time can be configured on the bottom of the extension configuration
dialog. Scroll down the add Time Condition for specific time.
• Office Time and Holiday could be configured on page Settings->Time Settings-
>Office Time/Holiday page.
Call Forward Busy
Configure the Call Forward Busy target number. If not configured, the Call Forward
Busy feature is deactivated. The default setting is deactivated.
CFB Time
Condition
Select time condition for Call Forward Busy. The available time conditions are “Office
Time”, “Out of Office Time”, “Holiday”, “Out of Holiday”, “Out of Office Time or Holiday”
and “Specific”.
Note:
• “Specific” has higher priority to “Office Times” if there is a conflict in terms of time
period.
• Specific time can be configured on the bottom of the extension configuration
dialog. Scroll down the add Time Condition for specific time.
• Office Time and Holiday could be configured on page Settings->Time Settings-
>Office Time/Holiday page.
Do Not Disturb
If enabled the extension will ignore all incoming calls
DND Time
Condition
Select time condition for Do Not Disturb. The available time conditions are “Office
Time”, “Out of Office Time”, “Holiday”, “Out of Holiday”, “Out of Office Time or Holiday”
and “Specific”.
Note:
• “Specific” has higher priority to “Office Times” if there is a conflict in terms of time
period.
• Specific time can be configured on the bottom of the extension configuration
dialog. Scroll down the add Time Condition for specific time.
Office Time and Holiday could be configured on page Settings->Time Settings->Office
Time/Holiday page.
DND Whitelist
If DND is enabled, all calls to this extension will be rejected except the numbers listed
on this list.
Note: The maximum number on the Whitelist is 10.
CC Settings
Enable CC
If enabled, UCM6200 will automatically alert this extension when a called party is
available, given that a previous call to that party failed for some reason. By default it’s
disabled.
CC Mode
Two modes for Call Completion are supported:
• Normal: This extension is used as ordinary extension.
• For Trunk: This extension is registered from a PBX.
The default setting is “Normal”.
CC Max Agents
Configure the maximum number of CCSS agents which may be allocated for this

Grandstream Networks UCM6206 Specifications

General

Brand	Grandstream Networks
Model	UCM6206
Category	IP Phone
Language	English