7 – 158 HEIDENHAIN Technical Manual TNC 426, TNC 430
Module 9071 Find the string length
The TNC ascertains the length of the string in a selectable string memory (S0
to S15).
Call:
PS K/B/W/D/S<String no. or string>
CM 9071
PL B/W/D <Length of the string>
Error recognition:
Marker Value Meaning
M4203 0 String length was ascertained
1 Error. See W1022
W1022 2 Invalid immediate strings, address of the source or
target string is out of range (0..7), string memory was
searched but no string end was found
To Next Page
Loading...
