9 – 4 HEIDENHAIN Technical Manual TNC 426, TNC 430
9.2 CycleDesign
CycleDesign software enables you to:
n Add your own cycles and help graphics to the standard cycles, including the
associated soft keys
n Change the soft-key structure
n Remove cycles
n Reorganize cycle groups
n Develop your own cycles
With CycleDesign you can access all files of the HEIDENHAIN standard
cycles.
The program includes a soft-key editor for creating your own soft keys.
You can draw the help graphics to illustrate input parameters in any graphics
program that can save files in DXF format, e.g., AutoSketch (not included).
The colors in which the TNC displays the graphics are defined in MP7364.x
“Color Setting” on page 7–225.
To Next Page
Loading...
