December 2001 Tool Changer 6 – 417
Indexed tools You can also work with indexed tools in the tool table, e.g., when you use a
stepped drill with more than one length compensation value. For indexed
tools, the tool number is given an index (e.g., 1.1).
7
77
7 In MP7262, enter the maximum tool index number.
The index number of the programmed tool is saved in W266.
If you are working with indexed tools and wish to use Modules 9092, 9093 or
9094, you must first find the line number of the tool, since these modules will
need it:
7
77
7 With Module 9091 you can determine the line number of a tool in the tool
table.
MP7262 Maximum tool index number for indexed tools
Input: 0 to 9
Module 9091 Finding the line number of a tool in the tool table
Call:
PS B/W/D/K <Tool number>
PS B/W/D/K <Tool index number>
CM 9091
PL B/W/D <Line number>
Error recognition:
Set Reset
W266 Index number of a programmed
indexed tool
NC NC
Marker Value Meaning
M4203 0 Line number was found
1 Error code in W1022
W1022 2 Invalid value for tool or tool index number
20 Module was not called in a submit job or spawn job
29 Tool table (TOOL.T) not found
30 Tool number not found
32 Tool index number not found
To Next Page
Loading...
