December 2001 Display and Operation 6 – 229
6.13.3 Graphic Display
In the graphics window you can view the following graphics:
n Test graphics
n Parallel graphics
n Programming graphics
n Help illustration
For the test graphics and parallel graphics you can choose one of three display
modes:
n Projection in three planes
n Plan view
n 3-D view
Projection in three
planes
The display in three planes can be shown in 1st-angle projection as preferred
in Germany or in the American-style 3rd-angle projection:
7
77
7 Select the type of projection with MP7310, bit 0.
Rotation of the
coordinate system
You can rotate the coordinate system for graphic display by +90° if, for
example, the Y axis is defined as tool axis.
7
77
7 Select the angle of rotation with MP7310, bit 1.
German preferrred U.S. preferred
Example
:
X
Z
No rotation
90
° rotation
Z
X
To Next Page
Loading...
