December 2001 Integrated Oscilloscope 6 – 461
Saving the
recording
With “Saved” you can store the last recorded signal.
With the SAVE SCREEN soft key you can save the recorded signals with all
settings in a file on the hard disk. The file must have the extension .DTA. You
can recall these data with the PC program PLCdesign.
Select the memory area to be displayed. A new soft-key row
with the following soft keys appears:
Move the signal to the left
Move the signal to the right
Decrease the horizontal resolution.
Increase the horizontal resolution.
Return to oscilloscope display.
Back to setup menu.
Start recording. The recording is ended either with a trigger
condition or with the STOP soft key.
Exit the oscilloscope function.
Meaning of the soft keys:
To Next Page
Loading...
