HEIDENHAIN TNC 430 PA/M - Colors

December 2001 List of Machine Parameters 4 – 55
4.3.15 Colors
MP Function and input Software
version and
behavior
Page
MP7350 Window frames PLC
RUN
6 – 225
MP7351 Error messages PLC
RUN
6 – 225
MP7352 “Machine” operating mode display PLC
RUN
6 – 225
MP7352.0 Background
MP7352.1 Text for operating mode
MP7352.2 Dialog
MP7353 “Programming” operating mode display PLC
RUN
6 – 225
MP7353.0 Background
MP7353.1 Text for operating mode
MP7353.2 Dialog
MP7354 “Machine” program text display PLC
RUN
6 – 225
MP7354.0 Background
MP7354.1 General program text
MP7354.2 Active block
MP7354.3 Background of inactive window
MP7355 “Programming” program text display PLC
RUN
6 – 225
MP7355.0 Background
MP7355.1 General program text
MP7355.2 Active block
MP7355.3 Background of inactive window
MP7356 Status window and PLC window PLC
RUN
6 – 226
MP7356.0 Background
MP7356.1 Axis positions in the status display
MP7356.2 Status display other than axis positions
MP7357 “Machine” soft-key display PLC
RUN
6 – 226
MP7357.0 Background
MP7357.1 Symbols
MP7358 “Programming” soft-key display PLC
RUN
6 – 226
MP7358.0 Background
MP7358.1 Symbols
MP7360 Graphics: 3-D view PLC
RUN
6 – 226
MP7360.0 Background
MP7360.1 Top surface
MP7360.2 Front face
MP7360.3 Text display in the graphics window
MP7360.4 Lateral face