December 2001 PLC Functions 7 – 13
7.1.7 COMPILE Function
A newly written PLC program does not become effective until it is compiled
and thereby transferred to the process memory. The name of the compiled
program then appears in the main menu next to PGM IN EXEC.MEM.
To compile a PLC program:
7
77
7 Press the COMPILE soft key. The TNC displays an overview of existing PLC
programs.
7
77
7 With the cursor keys, select the PLC program to be compiled.
7
77
7 Press the SELECT soft key.
If the TNC displays error messages: See “Error Messages” on page 10 – 3
To Next Page
Loading...
