December 2001 Display and Operation 6 – 333
6.13.32 Log
The log serves as a troubleshooting aid. There are 2 MB of memory available
for this purpose.
All entries in the log are marked with the current date and time.
Entry Description
RESET Powering up the control
BERR Blinking error message
BREG Register contents with a blinking error message
ERR Error message
P: PLC error message with the line number in the PLC
error text file
N: NC error message with number
KEY Key strokes
STIB
a
ON Control-in-operation on
OFF Control-in-operation off
BLINK Control-in-operation symbol blinking
INFO MAIN START Control model and NC software
INFO MAIN FILE DEL Faulty files on the hard disk, to be erased when
started up
INFO MAIN HDD Hard disk designation
INFO MAIN CYCLES Test results for fixed cycles and touch probe cycles
a. STIB = control-in-operation symbol in the screen display
To Next Page
Loading...
