HEIDENHAIN TNC 430 PA/M - Touch Probe

2 – 20 HEIDENHAIN Technical Manual TNC 426, TNC 430
TS 220 Touch Probe
Touch-trigger probe with cable connection for
workpiece setup, measurement during
machining, and digitizing.
Id. Nr. 293 488-xx
Id. Nr. 274 543-xx
TS 220
Adapter cable for
connection to the LE
TS 632 Touch Probe
Touch-trigger probe with infrared transmission,
for workpiece setup and measurement during
machining.
Id. Nr. 331 397-xx
Id. Nr. 346 322-xx
Id. Nr. 346 323-xx
Id. Nr. 354 656-xx
Id. Nr. 310 197-xx
TS 632
EA 632 receiver unit
EA 652 receiver unit
APE 652 interface
electronics for connecting
two EA 652 to the LE
Adapter cable for
connecting the EA 632 or
the APE 652 with the LE