December 2001 Overview of Components 2 – 11
BTS 1x0 Monitor/Keyboard Switch
With the BTS 1x0, it is possible to connect two
monitors and two operating panels to an LE.
Id. Nr. 317 292-01
Id. Nr. 329 965-02
BTS 110 (2 x BC 120)
(see figure at right)
BTS 120 (2 x BF 120)
MB 420 Machine Operating Panel
Machine operating panel with snap-on
(switchable) keys. You can find an overview of
the available key symbols on Page 2 – 15.
Key assignment:
n Emergency stop
n Machine control voltage
n NC start, NC stop
n Five axis keys
n Rapid traverse
n Coolant
n Spindle start, spindle stop
n 7 keys for machine functions
• Standard assignment: FN 1 to FN 5
• Assignment for HEIDENHAIN basic PLC
program: Retract axis, Tool change, Unlock
tool, Menu selection →, Unlock door,
Rinse water jet, Chip removal
Id. Nr. 293 757-33
Id. Nr. 293 757-45
Standard
Basic PLC program
To Next Page
Loading...
