HEIDENHAIN TNC 430 PA/M - Page 272

4 – 34 HEIDENHAIN Technical Manual TNC 426, TNC 430
MP3440.0-7 k
V
factor for spindle orientation for gear ranges 1 to 8
Input: 0.1 to 10 [(1000°/ min) /°]
PLC
RUN
6 – 202
MP3450.0-7 Number of spindle position-encoder revolutions for gear
ranges 1 to 8
Input: 0 to 65 535
0: No transmission
PLC
RUN
6 – 181
MP3451.0-7 Number of spindle revolutions for gear ranges 1 to 8
Input: 0 to 65 535
0: No transmission
PLC
RUN
6 – 181
MP3510.0-7 Rated speed for the gear ranges 1 to 8
Input: 0 to 99 999.999 [rpm]
PLC 6 – 187
MP3515.0-7 Maximum spindle speed for gear ranges 1 to 8
Input: 0 to 99 999.999 [rpm]
PLC 6 – 191
MP3520.0 Speed activation through marker M4011
Input: 0 to 99 999.999 [rpm]
PLC
RUN
6 – 205
MP3520.1 Spindle speed for oriented stop
Input: 0 to 99 999.999 [rpm]
6 – 202
MP Function and input Software
version and
behavior
Page