December 2001 Display and Operation 6 – 235
Set Reset
M4133 Starting and stopping the free
rotation function
PLC NC
B518 Defining the free rotation function
0: Cancel the function
8: Free rotation for axis 4
16: Free rotation for axis 5
PLC PLC
B519 Traverse direction for free rotation
0: Axis 4 and axis 5 = +
8: Axis 4 = – , axis 5 = +
16: Axis 4 = +, axis 5 = –
24: Axis 4 and axis 5 = –
PLC PLC
W754 % function for feed-rate override for
free rotation
PLC PLC
W566 - 568 Feed rate for free rotation
Axis 4 to axis 5
PLC PLC
To Next Page
Loading...
