6 – 404 HEIDENHAIN Technical Manual TNC 426, TNC 430
MP7267 Elements of the pocket table
Input: 0: No display
1 to 99: Position in the pocket table
MP7267.0 Tool number (T)
MP7267.1 Special tool (ST)
MP7267.2 Fixed pocket (F)
MP7267.3 Locked pocket (L)
MP7267.4 PLC status (PLC)
MP7267.5 Tool name (TNAME)
MP7267.6 Comment on the tool (DOC)
Note
The TNAME (tool name) column contains the name of the tool from the tool
table and therefore cannot be edited. For indexed tools, the name of the
tool is entered with the index 0.
To Next Page
Loading...
