Hillrom Centrella Smart+ Bed - Modes

Mattress Information
Centrella® Smart+ Bed Instructions for Use Manual (193587 REV 10) 105
CONTRAINDICATION:
Contraindication—Use of active therapy surfaces (mattresses) with patients with unstabilized spinal
cord injury could cause serious injury to the patient.
Use loose fitted sheets (preferably knitted) for maximum pressure redistribution.
The Centrella® max mattress is a powered air mattress that has a MicroClimate Management® (MCM)
cover that operates continuously while the patient is on the bed. MCM helps decrease localized heat
and moisture buildup that occurs between the patient and the mattress.
For the Centrella® max mattress to operate correctly, there must be a minimum of 70 lb (32 kg) on the
mattress.
Modes
Normal
The normal mode of the mattress provides continuous full-body pressure redistribution for patients 70
to 500 lb (32 to 277 kg). The mattress automatically adjusts the air system to accommodate changes in
weight distribution.
Pressure redistribution is always active unless one of these occur:
• Max Inflate is active.
•AC power is not available.
• An error has occurred with the mattress.
The mattress should be regularly examined for damage.
To Activate
1. Press the Mattress menu control.
2. Press Normal.
Max Inflate
The Max Inflate mode maximizes the firmness of the mattress. This assists in patient mattress-to-
mattress transfers and/or adjustment of the patient’s position.
NOTE:
The mattress will automatically exit the Max Inflate mode and return to Normal mode after 15
minutes. When there are 2 minutes left, a beep will sound and a message will show on the
touchscreen. The caregiver will have the option to keep the mattress in Max Inflate mode or let it
return to Normal mode.