Hillrom Centrella Smart+ Bed - Patient Helper Bracket Support (P7938) and Patient Helper Sleeve (P3212); Patient Helper Bracket Support (P7938) and HD Patient Helper Mount (P7939); Traction Frame (P7927 or P7937)

Accessories
Centrella® Smart+ Bed Instructions for Use Manual (193587 REV 10) 123
PATIE NT HELPER BRACKET SUPPORT (P7938) AND PAT IE NT HELPER SLEEVE (P3212)
PATIE NT HELPER BRACKET SUPPORT (P7938) AND HD PATIE NT HELPER MOUNT (P7939)
TRACTION FRAME (P7927 OR P7937)
WARNING:
Warning—Do not exceed the 113.5 kg (250 lb) load capacity of the Patient Helper Bracket Support
when used with the Patient Helper Sleeve. Injury or equipment damage could occur.
The patient helper bracket support is for use with patient helper
sleeves from traction equipment manufacturers.
The patient helper sleeve (P3212) must be installed before the
adapter bracket is installed on the bed. Refer to the equipment
manufacturer’s instructions for installation procedures.
The P3212 patient helper sleeve is for use with the Orthopedic
System, Inc. patient helper.
WARNING:
Warning—Do not exceed the 127 kg (280 lb) load capacity of the Patient Helper Bracket Support
when used with HD Patient Helper Mount. Injury or equipment damage could occur.
The patient helper bracket support (P7938) is for use with patient
helper sleeves from traction equipment manufacturers.
The HD patient helper mount P7939 must be installed before the
adapter bracket is installed on the bed. Refer to the equipment
manufacturer’s instructions for installation procedures.
The P7939 HD patient helper mount is for use with the Zimmer HD
patient helper.
WARNING:
To help prevent injury and/or equipment damage, obey these warnings:
• Warning—The sleep deck moves independently of the bed frame. Failure to account for the
sleep deck movement when using fracture frames and/or traction equipment can cause
serious injury or death.
• Warning—Do not exceed the 113.5 kg (250 lb) load capacity of the Traction Frame.