Cleaning and Disinfecting
Centrella® Smart+ Bed Instructions for Use Manual (193587 REV 10) 129
Clean the folds of the mattress sleeve.
c. Examine the following for damage:
• Top mattress cover
• Bottom mattress cover and white attachment knobs
•Zipper closure
d. The damaged items should be replaced.
STEP 2: Disinfection
a. With a new or clean wiping cloth soaked in an approved cleaner/disinfectant, use light pressure
to wipe all exterior surfaces of the bed previously cleaned.
b. Make sure all surfaces remain wet with the cleaner/disinfectant for the specified contact
time. Re-wet surfaces with a new wiping cloth as necessary. See
“Table 1: Approved
Cleaners/Disinfectants” on page 125 for the contact time.
If bleach is used with another cleaner/disinfectant, use a new or clean cloth/wipe soaked in tap
water to remove any disinfectant residue prior to and after the bleach application.
Prepare the Bed for Use
a. Connect the mattress retention knobs at the head and foot ends of the mattress.
b. Plug the bed into an applicable power outlet.
LAUNDRY GUIDELINES
Laundry can be used as a pre-cleaning step for the Centrella® max top mattress cover. Launder the
cover, then follow the Cleaning and Disinfection instructions.
NOTES:
• The Centrella® pro or core mattress covers can not be laundered.
•Do not use bleach.
Machine wash the top cover as follows:
a. Unzip and remove the top cover from the mattress.