Graphical Caregiver Interface (GCI)® Controls
Centrella® Smart+ Bed Instructions for Use (193587 REV 10) 57
Scale “A” Specifications
Scale accuracy: 0.5 kg (1.1 lb) or 0.5% of the patient weight, whichever is greater, when the bed is in the
required bed position.
Scale accuracy: 1.0 kg (2.2 lb) or 1% of patient weight, whichever is greater, when the bed is Not In
Optimum Position.
SCALE “B”—NAWI COMPLIANT (EN 45501)
When the weight is saved, a beep will sound and a confirmation screen
will show.
Some beds are equipped with the NAWI scale. You can tell if your bed
is equipped with the NAWI scale by these:
• The scale screen shows “0/T” above the Zero control.
• The weigh screen shows a magnifying glass.
Through the Scale menu control you can do these:
•Zero the scale.
• Weigh the patient.
• View the current patient’s weight, previous weight, and the
difference between the two.
• Add items that should be included or remove items that
should not be included in the patient weight measurement.
Non-Verified Weight
A Non-Verified Weight is a live weight reading of the patient and all
items on the weighing area that are not zeroed/tared out of the
measurement.
To verify the weight, remove the items on the weigh area that are not
zeroed/tared, and press Verify.
To Next Page
Loading...
