162
_____________________________________________________________________________________________
11.1 Maintenance and Service
______________________________________________________________________________________________
11.1 Maintenance and Service
To ensure the safe operation of this unit, perform maintenance regularly.
Be sure to read assiduously the various items highlighted in this manual
for attention, in order to use the unit correctly.
If the unit is not functioning properly, check the Section 11.3
"Troubleshooting" list. If a problem is found, contact your dealer or
HIOKI representative. Pack the unit carefully so that it will not be
damaged during transport, and write a detailed description of the problem.
HIOKI cannot bear any responsibility for damage that occurs during
shipment.
If the unit has been subject to moisture, or if oil and dust have
accumulated in the unit interior, the danger of electrical shock or fires
resulting from the deterioration of insulation increases greatly. If the unit
is ever subject to excessive moisture, oil, or dust, cease use immediately,
and return the unit to us for maintenance.
Periodic calibration is necessary to verify and maintain accuracy. If
calibration becomes necessary, return the unit to us for maintenance.
This product uses a lithium battery to back up it's memory. As the battery
power is consumed, it's ability to store measurement conditions
diminishes. In the event that measurement conditions can no longer be
stored, please contact the manufacturer for repair service.
Spare and replacement parts for this product are guaranteed to be available
only until 7 years after manufacture of this model is terminated.
Cleaning
To clean the product, wipe it gently with a soft cloth moistened with water
or mild detergent. Never use solvents such as benzene, alcohol, acetone,
ether, ketones, thinners or gasoline, as they can deform and discolor the
case.
To Next Page
Loading...
