Hioki 3159 - 2.1 Connecting the Protective Ground Terminal

10
_____________________________________________________________________________________________
2.1 Connecting the Protective Ground Terminal
______________________________________________________________________________________________
WARNING
To avoid electric shock, be sure to connect the protective ground
terminal to a grounded conductor.
To avoid electric shock, connect the protective ground terminal to a
grounded conductor before making any other connections.
2.1 Connecting the Protective Ground Terminal
1. Using a Phillips-head screwdriver, remove the protective ground terminal
from the rear of the unit.
2.
Connect an electric wire with a sufficient current capacity to the
protective ground terminal, and secure the wire using a Phillips-head
screwdriver.
3.
Ground the other end of the wire.