Hioki 3159 - Resetting the System

166
_____________________________________________________________________________________________
11.5 Resetting the System
______________________________________________________________________________________________
Comparative voltage value setting OFF
Comparative voltage value 0.00 kV
Upper limit value 0.2 mA
Lower limit value setting OFF
Lower limit value 0.1 mA
Test time setting ON
Test time 0.5 s
Output voltage range 2.5 kV
Test voltage value 500 V
Lower limit value 1000 M
Ω
Upper limit value setting OFF
Upper limit value 2000 M
Ω
Test time setting ON
Test time 0.5 s
11.5 Resetting the System
While pressing the SHIFT key, press the main power switch to turn on
power.
Parameters after resetting the system
Once the system is reset, the following parameters are initialized together
with the saved setting data. The optional settings are reset to default values
(initial settings).
(1) Withstand-voltage mode
(2) Insulation resistance mode