Contents
Introduction i
Inspection
i
Safety Notes
ii
Notes on Use
v
Chapter Summary
vi
Chapter 1 Overview 1
1.1 Product Introduction 2
1.2 Names and Functions of Parts
3
1.2.1 Front panel 3
1.2.2 Rubber keys 4
1.2.3 Rear panel 5
1.2.4 9615 H.V. TEST LEAD 6
1.2.5 REMOTE CONTROL BOX 7
1.3 External Dimensions 8
Chapter 2 Testing Arrangements 9
2.1 Connecting the Protective Ground Terminal 10
2.2 Connecting the External I/O Connector
11
2.3 Power Cord Connection
12
2.4 Powering On and Off the Unit
13
2.5 Connecting the 9615 H.V. TEST LEAD
14
2.6 Connecting the REMOTE CONTROL BOX
15
2.7 Installation of the Unit
16
2.8 Connection to the Measured Equipment
17
2.9 Startup Inspection
18
Chapter 3 Withstand Voltage ModeTesting Method 19
3.1 Withstand Voltage Mode Display 20
3.2 Displaying the READY State
22
3.2.1 Key-lock Function 23
3.3 "SETTING" State 24
3.3.1 Setting the Comparative Voltage Value 25
3.3.2 Setting the Upper (Lower) Limit Value 26
3.3.3 Setting the Test Time 27
3.3.4 Setting the Output Voltage range 28
3.3.5 Examples of Settings 29
To Next Page
Loading...
