INDEX 2
_____________________________________________________________________________________________
INDEX
______________________________________________________________________________________________
-M-
Measured current value 36,39,44
Measured resistance
59,62,65
Measured voltage value
22,36,39,44,48,59,62,65,143,145
Measurement range
53,95
Memory function
2,159
Momentary out 84,89,159
-O-
Operate switch 7,15
Optional function 20,46,83
-P-
PASS HOLD function 83,85
Parameter 127
Power
5,12,160
Power cord 12
Priority for control
34,58,74,89
Protective ground terminal v,10
-R-
RS command [START] 84,92
RS-232C terminal 5
Range selection swit
33
Remote control box
7,15,158,APPENDIX1,APPENDIX2
-S-
STATUS OUT dip switch 5,122
STATUS OUT relay terminal
5,122
Save 23,49,99,147,149
Startup inspection
18
Status out 2,5,122,159
Switch signal line plug
15,34,58,74
-T-
Test time elapsed 36,59
Timing chart
117
-U-
Upper limit value 26,52
-V-
Voltage comparator position 84,94
-W-
Withstand voltage mode 19
- Others -
"SETTING" state 20,24,46,50
"PASS" state 21,37,47,60,69,76
"FAIL" state
21,40,47,63,69,79