Hioki 7075 - Page 130

120
────────────────────────────────────────────────────
8.4.2 Specific Commands
────────────────────────────────────────────────────
:OSET
Switches to Output Setting Screen
Commands
Parameters <ch>=channel no.
Explanation
Transmission Response Parameter explanation
:OSET:PHASe?
<ch> <ch>,<phase>
Query
:OSET:DELay
<ch>,<delay>
NRf (number of data)
Sets the delay.
:OSET:DELay?
<ch> <ch>,<delay>
Query
:OSET:FILTer
<ch>,<freq>
<freq>=PASS/F1MHZ/
F500KHZ/ F200KHZ/
F100KHZ/ F50KHZ/
F20KHZ/ F10KHZ/
F5KHZ/ F2KHZ/
F1KHZ/ F500HZ/
F200HZ/ F100HZ/
F50HZ
Sets the filter.
:OSET:FILTer?
<ch> <ch>,<freq>
Query
:OSET:FREQuency
<ch>,<freq>
<freq>=NRf [Unit: Hz]
Sets the frequency.
:OSET:FREQuency?
<ch> <ch>,<freq>
Query
:OSET:PERiod
<ch>,<period>
<period>=NRf [Unit:s]
Sets the period.
:OSET:PERiod?
<ch> <ch>,<period>
Query
:OSET:RANGe
<ch>,<range>
<range>=R10V/R1V/
R0_1V
Sets the range.
:OSET:RANGe?
<ch> <ch>,<range>
Query
Query
:OSET:DUTY
<ch>,<duty>
<duty>=NRf [Unit:%]
Sets the duty.
:OSET:DUTY?
<ch> <ch>,<duty>
Query
:OSET:TRACking
<ch>,<item>
<ch>=OFF/CH1_2/
CH1_3/ CH1_4
<item>=WAVE/
FREQuency/
AMPLitude/ FILTer/
DUTY
Selects simultaneous
settings
:OSET:SWEep
<ch>,ON/OFF
Enables sweep
:OSET:SWEep?
<ch> <ch>,ON/OFF
Query
:OSET:WAVE
<ch>,<wave>
<ch>=1 to 4
<wave>=SINe/SQUare/
PULSe/TRIangle/
RAMP1/RAMP2/
NOISe/DC/AWG
Selects a basic waveform
:OSET:WAVE?
<ch> <ch>,<wave>
Query
:OSET:AWG
<ch>,"<wave>"
"<wave>"= waveform
name
Selects an arbitrary
waveform
:OSET:AWG?
<ch> <ch>,"<wave>"
Query
:OSET:AWG:SIZE?
"<wave>" "<wave>",<size>
<size>=NR2 (number of
data)
Query
:OSET:AWG:
NUMBer?
<number>
<number>=NR2
(Readable waveform
number)
Query