APPENDIX 3
────────────────────────────────────────────────────
Appendix 2 Error Message List
────────────────────────────────────────────────────
Error No. Message Description
Waveform Loading Errors
401 Model not specified.
The (loading) model is not specified.
402 Not a data file.
The file does not contain data.
403 Incorrect channel number.
Check the channel number setting.
404 Different file.
The model is different from that selected. Check
the model settings.
405 Wrong length.
The (specified) data count is incorrect.
406 FD has been changed.
The media was changed while setting.
410 Wave space is full.
There is no more waveform space. Delete
unneeded waveforms.
411 Duplicate name.
An existing waveform has the same name. Use
a different name.
420 to 434 Wave used for CHx. Cannot delete
or change.
Cannot delete or change a name specified for a
arbitrary waveform. Cancel the arbitrary
waveform setting and repeat the operation. This
is the same when specifying a arbitrary
waveform for the sweep settings.
435 Waveforms are currently input.
Waveforms are being read by other means.
Waveform input is not possible.
436 Alteration is impossible during RUN.
Waveforms currently being output cannot be
input.
Floppy Disk Errors
501 to 510 Hardware error.
Theunitisinneedofrepair.
511 Drive not ready.
Confirm that the disk is inserted correctly.
512 Write protected.
Disable the write protection on the disk and
repeat the operation.
513 Unknown error.
An unspecified error occurred.
514 Directory not empty.
The directory to be deleted is not empty.
515 Unreadable media.
Please insert FD again.
The format of the media is not recognized, or
the floppy disk may not be inserted correctly.
Reinsert the disk and try again.
516 FD has been changed.
The disk was pulled out. Undo the operation.
517 Media full.
Delete files or insert another disk.
520 Directory name already exists.
Use a different name.
580 There is no VERSIONUP file.
No version update file is present.
581 Version update failed.
No version update occurred.
Download-Related
601 Syntax error. Please check settings.
Download data is corrupt.
602 Command error. Please check
settings.
Download data is corrupt.
603 Invalid channel.
The specified channel is invalid.
604 The machine is not ready.
The machine is not ready.
To Next Page
Loading...