Hioki LR8450 - Page 249

244
Conguring and Establishing a LAN Connection
LAN conguration process
Objective To connect the instrument to an existing network
To connect the instrument
to a single computer
Enter the hostname, authentication username, and authentication password.
The instrument will
automatically acquire an
IP address and connect to
the network.
The instrument will
connect to the network
using the previously
congured IP address.
(When the instrument has been assigned a name)
[Host name]
Settings if on
same network
[DHCP server]: [ON] [DHCP server]: [OFF] [DHCP server]: [OFF]
Instrument’s [IP address] Instrument’s [IP address]
[Subnet mask] [Subnet mask]
Settings if
connecting
to a di󰀨erent
network (using
a gateway)
(Congured automatically) [Gateway]: [ON] [Gateway]: [OFF]
[Gateway IP]
[DNS]: [ON]
[DNS IP]
[DNS]: [OFF]
Connection
Select [Apply]. Select [Apply].
Connect with a straight cable. Connect with a cross cable.
HIOKI LR8450A964-03
w ww . . co m
information@itm.com1.800.561.8187