21
Setting Measurement Conditions
When the recording time is set to [Specied time] and repeat recording is set to
[ON]
Internal processing will take some time (downtime) between the time that recording stops after the
specied amount of time has elapsed and the start of the next recording operation. Recording is not
performed during this time.
Recording
Downtime
You can record without any downtime by setting the recording time to [Continuous] and
enabling auto saving and le splitting. Saved data les can be segmented using the desired time
segment.
Settings and Operation
w ww . . co m
information@itm.com1.800.561.8187
To Next Page
Loading...
