Honeywell equIP Series - Page 116

96
Configuring Video
Setting the Maximum Bit Rate
You can set the maximum data transfer rate.
To set the maximum bit rate:
1. Click the Compression Settings tab.
2. In the Compression Settings panel, in the Maximum Bit Rate (kbps) box,
do one of the following:
•If Priority is Quality, type a value from 400 to 5000 (default = 5000)
•If Priority is Bit Rate, select one of the following:
• 1.3x Target Bit Rate
• 1.4x Target Bit Rate
• 1.6x Target Bit Rate
• 1.8x Target Bit Rate
• 2.0x Target Bit Rate
3. Click Apply.
Setting the Group of Pictures
You can set the number of frames that make up the group of pictures (GOP).
To set the number of frames:
1. Click the Compression Settings tab.
2. In the Compression Settings panel, in the GOP (No. of Frames) box, type
a number from 1 to 100 (default = 30).
3. Click Apply.