Model IFP-2000/ECS Installation Manual 151430-L8
14-1
Section 14
Installation Records
This section of the manual is for you to use if you wish to track how points, zones, and groups have been
programmed.
14.1 Detector and Module Point Record
If installing IDP SLC devices, use Table 14-1 to record detector points (up to 159 per SLC loop) installed on the
on-board SLC loop and make a copy of Table 14-2 to record installed modules (up to 159 per SLC loop).
Table 14-1: Installation Record of Onboard Devices
Module Addr
Zone /
Group
Description Module Addr
Zone/
Group
Description
On-board 1 On-board 30
On-board 2 On-board 31
On-board 3 On-board 32
On-board 4 On-board 33
On-board 5 On-board 34
On-board 6 On-board 35
On-board 7 On-board 36
On-board 8 On-board 37
On-board 9 On-board 38
On-board 10 On-board 39
On-board 11 On-board 40
On-board 12 On-board 41
On-board 13 On-board 42
On-board 14 On-board 43
On-board 15 On-board 44
On-board 16 On-board 45
On-board 17 On-board 46
On-board 18 On-board 47
On-board 19 On-board 48
On-board 20 On-board 49
On-board 21 On-board 50
On-board 22 On-board 51
On-board 23 On-board 52
On-board 24 On-board 53
On-board 25 On-board 54
On-board 26 On-board 55
On-board 27 On-board 56
On-board 28 On-board 57
To Next Page
Loading...
Need help?
General
