Honeywell Farenhyt IFP-2000 - View Group Points; Edit OPG Template

Model IFP-2000/ECS Installation Manual 151430-L8
9-9
area with a single button press.
Figure 9-4 Corresponding Key and LED for Mapping Output Groups
9.4.2 View Group Points
1. Enter the installer code. The panel will automatically go to the main menu.
2. Select 7 for Panel Programming.
3. Press 3 to enter group menu.
4. Press 2 to view group points.
5. Enter the group number, then press ENTER.
9.4.3 Edit OPG Template
1. Enter the installer code. The panel will automatically go to the main menu.
2. Select 7 for Panel Programming.
3. Press 3 to enter group menu.
4. Press 3 to edit OPG Template.
5. Enter the Template number, then press ENTER
6. Press ENTER on the template name to edit the name.
You can use words to display a descriptive name for a group.
Note: See Appendix B for editing names.
7. Right arrow to the OPG and select YES or NO to select which output groups to include in the template.
ECS-VCM
ECS-SW24
Corresponding
Key and LED Numbers
Corresponding
Key and LED Numbers