151430-L8 Network Management
6-10
6.7 Network Management Quick Reference
Menu Options/Defaults Comments
Network
Programing
Learn
Network
Guest or member Add or remove
panels into the
network
See Section 6.2.1
Edit
Network
Names
Panel Names Network Panel ID Edit Panel Names See Section 6.2.2
Site Names Edit Site Member Edit Site Names
Edit Panel
ID
Change current
panel ID
See Section Figure 6.2.3 on
page 2
Computer
Access
Computer Access
Number
*123456 See Section 6.2.4
Computer Code *0
Computer Phone
Number
Up to 40 digits
Access
Codes
Select Profile
(01 - 20)
Edit Name Profile 1 is the profile that
dictates what functions the
Firefighter Key has access to.
Because this is the profile for a
keys, the user name and the
access code can not be edited
for this profile.
Profile 2 is the profile for the
installer and is referred to as the
“Installer Code”. This profile’s
user name and panel functions
can not be edited.
See Section 6.3.
Edit Access Code
Panel Functions
System Reset
System Silence
System ACK
Fire Drill Key
System Tests
Fire Drill Menu
Indicator Test
Walk Test-No Report
Walk Test-With Report
Dialer Test
Clear History Buffer
Point Functions
Disable/Enable Buffer
Point Status
Set SLC Device
Address
SLC Single Device
Locator
SLC Multi-Device
Locator
I/O Point Control
Event History
Set Time & Date
Network Diagnostics