Model IFP-2000/ECS Installation Manual 151430-L8
6-1
Section 6
Network Management
6.1 Network Diagnostics
6.1.1 Ping Panel
The Ping Panel menu allows you to continually ping any panel programmed into the network. As the selected
panel is being pinged, the Ping Panel screen will display the reply time, minimum and maximum reply times, and
sent and received counters.
1. Enter the Installer Code. The panel will automatically go to the main menu.
2. Select 5 for Network Diagnostics.
3. Press 1 to enter the Ping Panel Menu.
4. Press the Up or Down arrow to select Network Panel ID. Press ENTER to Ping panel.
6.1.2 Network Status
The Network Status screen will display statistics that are indicators of network performance.
1. Enter the Installer Code. The panel will automatically go to the main menu.
2. Select 5 for Network Diagnostics.
3. Press 2 to enter the Network Status menu.
6.1.3 Repeater Power
1. Enter the Installer Code. The panel will automatically go to the main menu.
2. Select 5 for Network Diagnostics.
3. Press 3 to enter the Repeater Power menu. The following message will appear:
6.2 Network Programming
This section of the manual describes how to program network options using the built-in annunciator. All options
described in this section can be programmed using the Silent Knight Software Suite (SKSS-2). To edit site
assignments, SKSS-2 must be utilized.
6.2.1 Learn Network
The Learn Network menu shows you all of the panels connected to the network. Any panel that has been
To Next Page
Loading...
Need help?
General
