151430-L8 Network Management
6-4
6.3 Access Codes
Access codes provide the user access to the control panel functions. Each access code can be customized for each
user. This allows some users the ability to access programming and other higher level panel functions, while
other users may only need access to lower level functions such as preforming fire drills, or acknowledging
trouble conditions.
Profile 1 is the profile that dictates what functions the Fire Fighter Key has access to. Because this is the profile
for a key, the user name and the access code can not be edited for this profile.
Profile 2 is the profile for the installer and is referred to as the “Installer Code”. This profile’s user name and
panel functions can not be edited. Table 7-9 lists the panel functions that can be selected for each user profile.
Table 6-1
: User Profile Selectable Panel Functions
Type of
Function
Selectable Functions
Panel Operations
System Reset
System Silence
System Ack
Fire Drill Key
Multi-site
F1 Function Key
F2 Function Key
F3 Function Key
F4 Function Key
ECS Control Request Function
ECS Super User Function
To Next Page
Loading...
Need help?
General
