Model IFP-2000/ECS Installation Manual 151430-L8
6-5
To change an access code:
1. Enter the installer code. The panel will automatically go to the main menu.
2. Select 6 for Network Programming Menu.
3. Select 5 for Access Codes.
Display reads: Select Profile 01
Fire Fighter’s Key
4. Select the access code you wish to edit by pressing the Up or Down arrow.
5. Then press ENTER.
Profile Edit Menu
From the Profile Edit Menu you can change the users name, access code, and the panel functions that the user
will have access to with their code.
Note: Profile 1 (Fire Fighter’s Key) the user name and access code can not be edited. Profile 2 (Installer) the
user name and panel functions can not be edited. Profile 3 (Multi-Site Installer) is defaulted with the Multi-
Site access option, but the entire profile can be edited.
Panel Menus
System Tests
Fire Drill Menu
Indicator Test
Walk Test-No Report
Walk Test -With Report
Dialer Test
Clear History Buffer
Point Functions
Disable/Enable Point
Point Status
Set SLC Device Address
SLC Single Device Locator
SLC Multiple Device Locator
I/O Point Control
Event History
Set Time & Date
System Information
Upload/Download
Network Diagnostics
Network Programming
Panel Programming
Table 6-1: User Profile Selectable Panel Functions
Type of
Function
Selectable Functions
.
To Next Page
Loading...
Need help?
General
