Honeywell Farenhyt IFP-2000 User Manual

Model IFP-2000/ECS Installation Manual 151430-L8
6-11
Network
Programming
(cont.)
Access
Codes
Select Profile
(01 - 20)
Panel Functions
Network
Programming
Profile 1 is the profile that
dictates what functions the
Firefighter Key has access to.
Because this is the profile for a
keys, the user name and the
access code can not be edited
for this profile.
Profile 2 is the profile for the
installer and is referred to as the
“Installer Code”. This profile’s
user name and panel functions
can not be edited.
See Section 6.3.
Panel Programming
System Information
Upload/Download
Multi-Site
Upload/Download
F1 Function Key
F2 Function Key
F3 Function Key
F4 Function Key
ECS Control Request
Function
ECS Super User
Function
Dialer
Dialer Assignments Select Panel Primary 0= unused See Section 6.4.1
Dialer
Miscellaneous
Enable pi SIA
Modifier
Yes
See Section 6.4.2
No
Receiver
Configuration
Select Receiver
Receiver Number
(1-4)
See Section 6.4.3
Receiver Format
Contact ID
SIA500
SIA8
SIA20
UNUSED
PHONE Number
Dialer Report Table
Panel
See Section 6.4.4
Report Alarms
Report Supervisory
Report Troubles
Report Events by
Point
Primary Receiver
Primary Account
Test Primary Account
Secondary Receiver
Secondary Account
Test Secondary
Account
Menu Options/Defaults Comments

Honeywell Farenhyt IFP-2000 Specifications

General

Brand	Honeywell
Model	Farenhyt IFP-2000
Category	Conference System
Language	English