Model IFP-2000/ECS Installation Manual 151430-L8
1
Appendix B
Editing Text Using the Built-In Programmer
This section contains tables of programmable characters that may be used for device, module, site, template,
group, and zone names or phone numbers.
B.1 Characters Used for Editing Text
Table B-1 lists the available characters and their associated numeric designator. When programming:
1. Use the Up or Down arrow key to scroll to the mode wanted.
2. Press the number shown in Table B-1 until the character wanted is shown.
3. Arrow left and right for position, and press enter to accept.
Table B-1: Character Table
Lower Case Letters
abc 1 def 2 ghi 3 jkl 4
mno 5 pqr 6 stu 7 vwx 8
yz 9 Spc 0
Upper Case Letters
ABC 1 DEF 2 GHI 3 JKL 4
MNO 5 PQR 6 STU 7 VWX 8
YZ 9 Spc 0
Numbers and Special Characters
1 [ ] 1
2 ( ) 2 3 . , 3 4 : ; 4
5 ’ " 5 6 ? ! 6 7 ‘ / 7 8 – + 8
9 = - 9 0 0 * & @ * # $ #
To Next Page
Loading...
