5. Configuration
5.4. Configuring Fieldbus Components In a Control Strategy
132 Experion PKS Series A Fieldbus Interface Module User's Guide R400
Honeywell July 2010
Step Action Result
20
Click the OK button.
This completes the configuration entries,
closes the form, and adds the CIOM-A
FIM icon to the Project tab. The CIOM-A
FIM also includes icons for the two H1
fieldbus links that it can support. The first
view that follows is for a non-redundant
CIOM-A FIM application and the second is
for a redundant CIOM-A FIM application.
The second view is in a system with the
Hierarchical Building license option set for
Assignment View. These views are for
example purposes only.
(Note that the system will generate an
error message detailing any problems
with the data entered and display it at
this time, so you can correct the errors
before closing the form.)
To Next Page
Loading...
