Honeywell Series A - Appendix C; 12.1 Fieldbus Status Display Indications

R400 Experion PKS Series A Fieldbus Interface Module User's Guide 495
July 2010 Honeywell
12. Appendix C
12.1 Fieldbus Status Display Indications
Fieldbus Status Byte
1-Char
Suffix
12-Char Independent
Status Field
Quality Substatus Limits
BAD Non-Specific No Limits B Bad
BAD Non-Specific Low Limit B Bad,LowLimit
BAD Non-Specific High Limit B Bad,HiLimit
BAD Non-Specific Constant B Bad,Constant
BAD
Configuration
Error
No Limits B Bad,Config
BAD
Configuration
Error
Low Limit B Bad,Config,L
BAD
Configuration
Error
High Limit B Bad,Config,H
BAD
Configuration
Error
Constant B Bad,Config,C
BAD Not Connected No Limits B Bad,NotCon
BAD Not Connected Low Limit B Bad,NotCon,L
BAD Not Connected High Limit B Bad,NotCon,H
BAD Not Connected Constant B Bad, NotCon,C
BAD Device Failure No Limits B Bad,DevFail
BAD Device Failure Low Limit B Bad,DevFail,L
BAD Device Failure High Limit B Bad,DevFail,H
BAD Device Failure Constant B Bad,DevFail,C
BAD Sensor Failure No Limits B Bad,SensFail
BAD Sensor Failure Low Limit B Bad,SnFail,L