11. Appendix B
11.1. Standard Function Block Parameters
R400 Experion PKS Series A Fieldbus Interface Module User's Guide 429
July 2010 Honeywell
Valid Views
VIEW_1, VIEW_3
Storage
Dynamic
Remarks
The data type consists of the value and status of floating
point parameters that are Inputs or Outputs. It uses the
following two elements.
1 Status
2 Value
CAS_IN_D
Classification
Record
Description
Represents the remote set point value for a discrete block
that must come from another fieldbus block or a distributed
control system (DCS) block through a defined link.
FF Data Type
DS-66
Range
Usage
I/Cascade Input
Length
2
Valid Views
VIEW_1, VIEW_3
Storage
Dynamic
Remarks
The data type consists of the value and status of discrete
value parameters. It uses the following two elements.
1 Status
2 Value
CHANNEL
Classification
Simple Variable
Description
The number of the logical hardware channel that is
connected to this I/O block. It defines the transducer used
to connect to the physical world.
FF Data Type
Unsigned 16
To Next Page
Loading...
