Honeywell Series A - Detail Displays Contents Based on FF Control Points Loading; Naming Conventions for Detail Displays

6. Operation
6.2. Foundation Fieldbus Detail Displays/Faceplates
R400 Experion PKS Series A Fieldbus Interface Module User's Guide 245
July 2010 Honeywell
AI (Analog Input)
DO (Digital Output)
DI (Digital Input)
AO (Analog Output)
MAI (Multiple Analog Input)
Note that the FF Detail Displays and faceplates are not applicable for mixed modes (FF
AI -> CEE PID -> FF AO).
REFERENCE - INTERNAL
Refer to the following documents for more information:
HMIWeb Display Building Guide for more information on creating
displays.
Server and Client Configuration Guide for more information on configuring
faceplates.
Detail Displays contents based on FF control points loading
Th
e FF control points can be loaded to FFLINK environment or CEE (C300 or C200)
environment. However, the contents in the Main tab display vary based on whether the
point is loaded to the CEE environment or to the FFLINK.
Naming conventions for Detail Displays
You
need to follow the conventions such as block name, Point Detail Display, and Group
Detail Display to view the FF Detail Displays.
The following table lists the conventions to be followed to view the FF Detail Displays.
Block name Point detail display Group detail display
AI sysdtlffaia sysdtlffai_fp
AO sysdtlffaoa sysdtlffao_fp
DI sysdtlffdia sysdtlffdi_fp
DO sysdtlffdoa sysdtlffdo_fp
PID sysdtlffpida sysdtlffpid_fp