Honeywell Series A - Ff_Val; Field_Val

11. Appendix B
11.1. Standard Function Block Parameters
442 Experion PKS Series A Fieldbus Interface Module User's Guide R400
Honeywell July 2010
Storage
Static
Remarks
The Data type consists of data that describes floating point
values for display purposes. It uses the following four
elements.
1 Engineering Units at 100 percent
2 Engineering Units at 0 percent
3 Units Index
4 Decimal Point
FF_VAL
Classification
Record
Description
Represents the feed-forward value.
FF Data Type
DS-65
Range
Usage
I/Input
Length
5
Valid Views
VIEW_3
Storage
Non-Volatile
Remarks
Read Only
The Data type consists of the value and status of floating
point parameters that are Inputs or Outputs. It uses the
following two elements.
1 Status
2 Value
FIELD_VAL
Classification
Record