5. Configuration
5.5. Loading Components Online
R400 Experion PKS Series A Fieldbus Interface Module User's Guide 219
July 2010 Honeywell
Loading Link contents or fieldbus device
Use the following procedure to load Link contents or fieldbus devices. It assumes that the
CIOM-A FIM has been loaded and the fieldbus devices are installed and powered on the
Links.
TIP
It is a good idea to load the fieldbus device before you load the Control
Modules containing its associated function blocks to the CEE or FIM. If you
load the Control Module first, you may get an error message indicating that
the "parent" block is not available.
Step Action Result
1
In Project tab, click the desired LINK
icon.
Click Controller->Load With Contents.
Opens the Load Dialog box.
To Next Page
Loading...
