5. Configuration
5.5. Loading Components Online
218 Experion PKS Series A Fieldbus Interface Module User's Guide R400
Honeywell July 2010
Step Action Result
TIP
After matching an uncommissioned device to a project device, it is a good idea to
right-click the device icon and select Upload from the popup menu and click Continue
to load device data into the Monitor database. Then, right-click the device icon and
select Update to Project from the popup menu and click Continue to synchronize the
data in the Project database with the Monitor database.
11
Repeat Steps 6 to 10 for another device
or repeat this procedure for LINK 2, as
required.
Return to appropriate Step in this
procedure.
12
Click the OK button. Closes the dialog.
13
Go to the next section Loading Link
contents or fieldbus device to download
the Project Device to the
Uncommissioned Device
To Next Page
Loading...
