Honeywell Series A - Lo_Lim; Lo_Lo_Alm

11. Appendix B
11.1. Standard Function Block Parameters
R400 Experion PKS Series A Fieldbus Interface Module User's Guide 455
July 2010 Honeywell
Remarks
Read Only
The Data type consists of data that describes floating point
alarms. It uses the following five elements.
1 Unacknowledged
2 Alarm State
3 Time Stamp
4 Subcode
5 Value
LO_LIM
Classification
Simple Variable
Description
Defines the setting for the low alarm in engineering units.
FF Data Type
Float
Range
- Infinity, PV_SCALE
Usage
C/Contained
Length
4
Valid Views
VIEW_4
Storage
Static
Remarks
Initial value is - Infinity
LO_LO_ALM
Classification
Record
Description
Represents the status of the low low alarm and its
associated time stamp.
FF Data Type
DS-71
Range
Usage
C/Alarm