10. Appendix A
10.2. Standard Function Blocks
386 Experion PKS Series A Fieldbus Interface Module User's Guide R400
Honeywell July 2010
Mode Abbreviation Operation Effect
initialization of the control application, when
the block mode is not remote-cascade.
Remote-Out ROut
The block's output is being set by a Control
Application running on an interface device
through the remote-output in parameter. The
algorithm must initialize to avoid a bump,
when the mode switches. The block
maintains a remote-output out parameter to
support initialization of the Control
Application, when the block mode is not
remote-output. The Set Point may be
maintained or initialized to the Process
Variable parameter value.
Analog Input block
AI
Transducer
OUT
Simulate
SIMULATE
Convert
L_TYPE
LOW_CUT
XD_SCALE
OUT_SCALE
Filter
PV_FTIME
Output
Alarms
HI/LO
PV
OUT
Mode
SHED_OPT
FIELD_VAL
CHANNEL
Figure 39 Functional schematic for Analog Input function block.
To Next Page
Loading...
