Honeywell Series A - OFFNETALM_ENABLED; OUT

11. Appendix B
11.1. Standard Function Block Parameters
R400 Experion PKS Series A Fieldbus Interface Module User's Guide 461
July 2010 Honeywell
Range
Positive
Usage
C/Contained
Length
4
Valid Views
VIEW_2
Storage
Static
Remarks
Ready Only
OFFNETALM_ENABLED
Classification
Simple Variable
Description
Represents enabling or disabling the Block Offnet
Diagnostic Alarm. By default, this is disabled.
FF Data Type
Bit String
Range
Enable
Disable
Usage
Device Offnet Process Alarm
Length
Valid Views
Storage
Dynamic
Remarks
This is not a Fieldbus block parameter. It is a Honeywell
parameter, which is stored internally on the FIM but
appears to reside on the Fieldbus block template.
OUT
Classification
Record
Description
Represents the primary analog value calculated as a result
of executing the function.
FF Data Type
DS-65
Range
OUT_SCALE +/- 10 percent