Honeywell Series A - Trk_Val

11. Appendix B
11.1. Standard Function Block Parameters
R400 Experion PKS Series A Fieldbus Interface Module User's Guide 489
July 2010 Honeywell
Range
Usage
C/Scaling
Length
11
Valid Views
VIEW_4
Storage
Static
Remarks
The Data type consists of data that describes floating point
values for display purposes. It uses the following four
elements.
1 Engineering Units at 100 percent
2 Engineering Units at 0 percent
3 Units Index
4 Decimal Point
TRK_VAL
Classification
Record
Description
Represents the input value for external tracking.
FF Data Type
DS-65
Range
Usage
I/Input
Length
5
Valid Views
VIEW_1, VIEW_3
Storage
Non-Volatile
Remarks
Read Only
The data type consists of the value and status of floating
point parameters that are Inputs or Outputs. It uses the
following two elements.
1 Status
2 Value