Honeywell Series A - BLOCK_ALM

11. Appendix B
11.1. Standard Function Block Parameters
R400 Experion PKS Series A Fieldbus Interface Module User's Guide 425
July 2010 Honeywell
Length
5
Valid Views
VIEW_3
Storage
Dynamic
Remarks
The data type consists of the value and status of floating
point parameters that are Inputs or Outputs. It uses the
following two elements.
1 Status
2 Value
BKCAL_SEL_3
Classification
Record
Description
The selector output value and status associated with
SEL_3 input that is provided to BKCAL_IN of the block
connected to SEL_3 to prevent reset windup.
FF Data Type
DS-65
Range
Usage
O/Back Calculation Output
Length
5
Valid Views
VIEW_3
Storage
Dynamic
Remarks
The data type consists of the value and status of floating
point parameters that are Inputs or Outputs. It uses the
following two elements.
1 Status
2 Value
BLOCK_ALM
Classification
Record
Description
The block alarm is used for all configuration, hardware,
connection failure, or system problems in the block. The