Honeywell Series A - Parameter Definition Editor supports Fieldbus Methods

3. Fieldbus Integration With Experion System
3.1. Overview
40 Experion PKS Series A Fieldbus Interface Module User's Guide R400
Honeywell July 2010
Figure 4 Typical Parameter Definition Editor view for selected fieldbus
device block
Parameter Definition Editor supports Fieldbus Methods
The
Parameter Definition Editor also retrieves any method code that manufactures
include in their Device Description (DD) files. The PDE includes a dedicated Methods
tab so you can easily see if the selected device block includes methods data. The
following figure shows a typical Methods tab view for a device block that includes
methods data.
TIP
Methods are usually associated with a device's Transducer and/or Resource
blocks.