Honeywell Series A - Page 135

5. Configuration
5.4. Configuring Fieldbus Components In a Control Strategy
R400 Experion PKS Series A Fieldbus Interface Module User's Guide 135
July 2010 Honeywell
Step Action Result
2
Key in >LINK10105< for this example.
Or, key in a unique name of your own
consisting of up to 16 characters. Press
<Tab>.
Moves cursor to the Item Name field.
3
Key in the name of the Entity that this
object will be associated with in the
Enterprise Model Builder hierarchy.
Press <Tab>.
Moves cursor to the Description field.
ATTENTION
Some parameters on this tab are not available, since they are only active in the
Monitoring tab after the FIM/LINK is loaded and communicating with the system.
4
Key in desired descriptive text of up to 24
characters. This text will appear in
applicable detail and group displays
associated with this block. Press <Tab>.
Moves cursor to Link Optimization field.
5
Click the arrow button and select desired
option from the list. Press <Tab>.
Moves cursor to Sample Skew field.
6
Click the arrow button and select whether
Skew is enabled or not. Click the System
Management tab.
Calls up the System Management tab.